Specifications TP-Link Omada SG5428X
| Features | Description |
|---|---|
| Device Type | 24-Port Gigabit Stackable Lite L3 Managed Switch with 4 × 10G Slots |
| Network Ports | 24 × 10/100/1000Mbps RJ45 Ports |
| Uplink Ports | 4 × 1/10Gbps SFP+ Slots |
| Switching Capacity | 128 Gbps |
| Packet Forwarding Rate | 95.23 Mpps |
| MAC Address Table | 16K |
| Packet Buffer Memory | 12 Mbit |
| Jumbo Frame | 9 KB |
| Stacking | Physical Stacking up to 4 Units |
| Stacking Bandwidth | Up to 80 Gbps |
| Layer 3 Features | Static Routing, RIP, OSPF, DHCP Server and DHCP Relay |
| Management | Omada SDN, Web GUI, CLI, SNMP and RMON |
| RJ45 Ports | 24 × 10/100/1000Mbps |
|---|---|
| SFP+ Slots | 4 × 1/10Gbps SFP+ |
| Console Port | 1 × RJ45 Console Port |
| USB Port | 1 × USB 2.0 |
| USB Type-C Console | 1 × USB Type-C Console Port |
| PoE | Not Supported |
| Switching Capacity | 128 Gbps |
| Packet Forwarding Rate | 95.23 Mpps |
| MAC Address Table | 16K |
| Packet Buffer Memory | 12 Mbit |
| Jumbo Frame | 9 KB |
| Fan | Fanless |
| SMART FEATURES | |
|---|---|
| 24-Port Gigabit Ethernet | Provides 24 × 10/100/1000Mbps RJ45 Ports for Gigabit Network Connectivity |
| 10G SFP+ Uplinks | Provides 4 × 1/10Gbps SFP+ Slots for High-Speed Uplink and Fiber Connectivity |
| Physical Stacking | Supports Physical Stacking of up to 4 Units with up to 80Gbps Stacking Bandwidth |
| Layer 3 Routing | Supports Static Routing, RIP and OSPF for Layer 3 Network Routing |
| DHCP | Supports DHCP Server and DHCP Relay for Automated IP Address Management |
| Omada SDN | Supports Centralized Cloud Management Through the Omada SDN Controller |
| VLAN | Supports 802.1Q VLAN for Network Segmentation and Traffic Isolation |
| Link Aggregation | Supports Link Aggregation for Increased Bandwidth and Link Redundancy |
| QoS | Supports 8 Priority Queues, 802.1p/DSCP Priority, Bandwidth Control and Storm Control |
| ACL | Supports IPv4/IPv6 ACL for Network Traffic Filtering and Network Security |
| ERPS | Supports Ethernet Ring Protection Switching for Rapid Protection and Recovery in Ring Topologies |
| Spanning Tree | Supports Spanning Tree Protocol for Loop Prevention and Network Redundancy |
| IGMP Snooping | Supports IGMP Snooping, MLD Snooping and Multicast VLAN Registration |
| Security | Supports 802.1X, MAB, Port Security, Dynamic ARP Inspection, IP Source Guard and DoS Defense |
| Management | Supports Web GUI, CLI, SNMP v1/v2c/v3, RMON and Omada SDN Management |
| Port Mirroring | Supports Port Mirroring and RSPAN for Network Monitoring and Troubleshooting |
| GENERAL | |
|---|---|
| Switch Type | Lite L3 Managed Gigabit Switch |
| Network Ports | 24 × 10/100/1000Mbps RJ45 |
| Uplink Ports | 4 × 1/10Gbps SFP+ |
| PoE | Not Supported |
| Management | Omada SDN, Web GUI, CLI, SNMP and RMON |
| Stacking | Up to 4 Units |
| Stacking Bandwidth | Up to 80 Gbps |
| Power Supply | 100–240V AC, 50/60Hz |
| Maximum Power Consumption | 19.6W at 220V/50Hz, 25°C |
| Maximum Heat Dissipation | 66.87 BTU/hr at 220V/50Hz, 25°C |
| Dimensions | 440 × 180 × 44 mm |
| Installation Method | 19-Inch Rack Mount |
| Cooling | Fanless Design |
| Operating Temperature | 0°C to 50°C |
| Operating Humidity | 10% to 90% RH, Non-Condensing |
| Storage Temperature | -40°C to 70°C |
| Storage Humidity | 5% to 90% RH, Non-Condensing |
Note: The TP-Link Omada SG5428X is a 24-port Gigabit Stackable Lite L3 Managed Switch featuring 4 × 1/10Gbps SFP+ slots. It provides 128 Gbps switching capacity, 95.23 Mpps packet forwarding performance, 16K MAC address table and 12 Mbit packet buffer memory. It is designed for enterprise and SMB networks requiring Gigabit access, 10G fiber uplinks, Layer 3 routing and network redundancy.
Important: The SG5428X is a non-PoE switch with 24 × Gigabit RJ45 ports and 4 × 1/10G SFP+ slots. All four SFP+ ports can be used as stacking ports, supporting up to 4 units with up to 80Gbps stacking bandwidth.
จัดจำหน่าย By บริษัทโฟกัส ซิสเต็ม แอนด์ ดีไซน์ ช่างติดเเละซ้อมกล้องวงจรปิด พัทยา ชลบุรี
