TP-Link Omada SG5452X 48-Port Gigabit Stackable Lite L3 Managed Switch with 4× 10G Slots

TP-Link Omada SG5452X

Omada 48-Port Gigabit Stackable Lite L3 Managed Switch with 4 × 10G Slots

  • 48 × Gigabit RJ45 ports and 4 × 1/10Gbps SFP+ slots
  • 176Gbps switching capacity with 130.94Mpps forwarding rate
  • Supports physical stacking up to 4 units with 40Gbps stacking bandwidth
  • Supports L3 routing including RIP, OSPF, VRRP and Static Routing
  • Supports ACL, 802.1X, Port Security, DoS Defense and ERPS
  • Omada SDN cloud management with Web UI, CLI, SNMP and RMON
หมวดหมู่: , , ป้ายกำกับ:

Specifications TP-Link Omada SG5452X

Features Description
Device Type 48-Port Gigabit Stackable Lite L3 Managed Switch with 4 × 10G SFP+ Slots
Network Ports 48 × 10/100/1000Mbps RJ45 Ports
Uplink Ports 4 × 1/10Gbps SFP+ Slots
Switching Capacity 176 Gbps
Forwarding Bandwidth 88 Gbps
Packet Forwarding Rate 130.94 Mpps
MAC Address Table 16K
Packet Buffer 12 Mbit
Jumbo Frame 9 KB
Stacking Physical Stacking up to 4 Units
Stacking Bandwidth Up to 40 Gbps
Layer 3 Features Static Routing, RIP, OSPF, VRRP, DHCP Server and DHCP Relay
Management Omada SDN, Web GUI, CLI, SNMP and RMON
RJ45 Ports 48 × 10/100/1000Mbps
SFP+ Slots 4 × 1/10Gbps SFP+
Console Ports 1 × RJ45 Console Port + 1 × USB Type-C Console Port
USB Port 1 × USB 2.0
PoE Not Supported
Switching Capacity 176 Gbps
Forwarding Bandwidth 88 Gbps
Packet Forwarding Rate 130.94 Mpps
MAC Address Table 16K
Packet Buffer 12 Mbit
Jumbo Frame 9 KB
Transmission Method Store-and-Forward
SMART FEATURES
48-Port Gigabit Ethernet Provides 48 × 10/100/1000Mbps RJ45 Ports for Gigabit Network Connectivity
10G SFP+ Uplinks Provides 4 × 1/10Gbps SFP+ Slots for High-Speed Fiber Uplink and Network Aggregation
Physical Stacking Supports Physical Stacking of up to 4 Units with up to 40Gbps Stacking Bandwidth
Layer 3 Routing Supports Static Routing, RIP and OSPF for Layer 3 Network Routing
VRRP Supports VRRP for Gateway Redundancy and High Availability
DHCP Supports DHCP Server and DHCP Relay
Omada SDN Supports Centralized Cloud Management Through the Omada SDN Controller
VLAN Supports 802.1Q VLAN for Network Segmentation and Traffic Isolation
Link Aggregation Supports Link Aggregation and LACP for Increased Bandwidth and Link Redundancy
QoS Supports 8 Priority Queues, 802.1p/DSCP Priority, Bandwidth Control and Storm Control
ACL Supports IPv4/IPv6 ACL for Network Traffic Filtering and Security
ERPS Supports Ethernet Ring Protection Switching for Rapid Protection and Recovery in Ring Topologies
Spanning Tree Supports STP, RSTP and MSTP for Loop Prevention and Network Redundancy
IGMP Snooping Supports IGMP Snooping, MLD Snooping and Multicast VLAN Registration
Security Supports 802.1X, MAB, Port Security, Dynamic ARP Inspection, IP Source Guard and DoS Defense
Management Supports Web GUI, CLI, SNMP v1/v2c/v3, RMON and Omada SDN Management
Port Mirroring Supports Port Mirroring and RSPAN for Network Monitoring and Troubleshooting
GENERAL
Switch Type Lite L3 Managed Gigabit Stackable Switch
Network Ports 48 × 10/100/1000Mbps RJ45
Uplink Ports 4 × 1/10Gbps SFP+
PoE Not Supported
Management Omada SDN, Web GUI, CLI, SNMP and RMON
Stacking Up to 4 Units
Stacking Bandwidth Up to 40 Gbps
Power Supply 100–240V AC, 50/60Hz
Fan Fanless
Maximum Power Consumption 34.1W at 220V/50Hz, 25°C
Maximum Heat Dissipation 116.42 BTU/hr at 220V/50Hz, 25°C
Dimensions 440 × 220 × 44 mm
Installation Method 19-Inch Rack Mount
Operating Temperature -5°C to 45°C
Storage Temperature -40°C to 70°C
Operating Humidity 10% to 90% RH, Non-Condensing
Storage Humidity 5% to 90% RH, Non-Condensing

Note: The TP-Link Omada SG5452X is a 48-port Gigabit Stackable Lite L3 Managed Switch featuring 4 × 1/10Gbps SFP+ slots. It provides 176 Gbps switching capacity, 130.94 Mpps packet forwarding performance, a 16K MAC address table and 12 Mbit packet buffer. It is designed for enterprise and SMB networks requiring high-density Gigabit access, 10G fiber uplinks, Layer 3 routing and network redundancy.

Important: The SG5452X is a non-PoE switch with 48 × Gigabit RJ45 ports and 4 × 1/10G SFP+ slots. The SFP+ ports can be used for uplinks and physical stacking. It supports up to 4 stacked units with up to 40Gbps stacking bandwidth.

จัดจำหน่าย By บริษัทโฟกัส ซิสเต็ม แอนด์ ดีไซน์ ช่างติดเเละซ้อมกล้องวงจรปิด พัทยา ชลบุรี

Datasheet